Pharmaceutical Water Systems Training Course (Virtual)

+ Book Online Now

Course Dates

  • Pharmaceutical Water Systems (Virtual)

    Start Date - TBD
    End Date - TBC

    Location: Virtual Training
    Course Price £1345.00
    Book Now
  • Pharma Water Systems

    We have produced an overview of the course information available online, available here in a handy PDF Prospectus.

    Download Course PDF
Course Terms & Conditions

Pharmaceutical Water Systems Training Course

Pharmaceutical Water Systems Training – This industry-leading Honeyman Training course is a must for anyone involved in designing, building, owning and operating pharmaceutical water systems.  Pharmaceutical Water: What’s all the fuss about?

There’s a lot of complacency about water. Even in the domestic situation, few people in the developed Western World think much about it – until it isn’t there. Then you can’t drink it, wash in it, shower, take a bath, water the garden, clean the car, clean windows etc. A couple of days without water and suddenly it’s the most important thing in life. The same is true in the pharmaceutical manufacturing environment. Water normally flows like manna from heaven to manufacture products, make up solutions, wash equipment, clean down areas etc. But no pharmaceutical facility would stay in production very long without it – water is truly a ‘critical utility’. Being without water has consequences in any situation, but there are two crucial differences between water used for domestic purposes and that for pharmaceutical manufacturing – Quality and Cost

Every pharmaceutical factory has to provide water of ‘controlled consistent quality’ for product manufacture and processing, and in most cases that involves a water purification system to generate the appropriate grade, and a storage and distribution system – effectively a ‘hygienic’ plumbing system – to get this purified water to the users. Most commonly, ‘Purified Water’ (PW) and ‘Water for Injections’ (WFI) are the bulk grades you would find in a pharmaceutical manufacturing environment, and these have strictly prescribed quality requirements in all the Pharmacoepias, along with one or two lesser used qualities.

It costs a lot to install a pharmaceutical grade water system, it also costs a lot to run it and to maintain it, to control and monitor it, week in and week out, and it even costs money to throw used water away whatever the grade. It costs even more if the water quality is bad, and production is stopped, or worse, if products have to be discarded. So quality and cost are inextricably linked when it comes to pharmaceutical water.

Another problem with pharmaceutical water systems is they must be monitored and controlled. A micro sample can be taken at 11 o’clock, tested in the lab and everything found to be fine five days later when the results come through, but in actual fact the system could have been contaminated at 1 minute past 11 and nobody would know until the next sample was taken. What’s more – the pipework passing through a facility can transmit water contamination everywhere – it can spread throughout the facility instantly. So you can’t easily ‘test quality in’ to a working water system, which mean a total (holistic) approach to quality is needed; i.e. the system must be designed well, operated and maintained properly, and be adequately monitored and controlled. Regulators such as MHRA and FDA inspectors of course, know this, and are likely to ask probing questions at audit about water systems. They know that water is crucial and a potential risk to quality and manufacturing.

But do the people involved know and understand their water systems? Can we be confident that the water system is good and producing quality water in between the testing?

Honeyman Training courses highlight the key and essential points of designing, building, owning and operating pharmaceutical water systems. Basic design of water purification, storage and distribution system elements will be outlined, with illustrated examples. Delegates from different backgrounds and disciplines such as Engineering QC/Microbiology, Validation, Plant and Production Operators will learn and understand the roles each plays in the management, maintenance and control of water systems. Good communication and understanding between these areas is of course essential and key to efficient and successful water system performance.

Honeyman lecturers are seasoned professionals, with many years’ experience in the field of pharmaceutical water. Their practical knowledge and experience enables them to host in-depth question and answer sessions, the history and background of today’s standards can be explained, and plenty of guidance and advice on the do’s and don’ts of water systems will be on offer.

For further information on best practice Pharmaceutical Water System design and installation, or to discuss site servicing, upgrade or new system procurement, please visit 

To view our full range of training courses please download the Honeyman Training Prospectus.  Or for upcoming courses see next course dates.  Or book your place at our Pharmaceutical Water Systems training course now online.

Who Should Attend This Course?

This course has been well received for many years by personnel involved in the design, management and operation of pharmaceutical and biopharmaceutical water systems from the following disciplines: Engineering, Quality Assurance, Microbiology, QC, Production, Operations and high purity water SME’s.

Course Features

Honeyman Training is renowned for industry leading GMP knowledge-transfer, lectures, consultancy and courses delivered face-to-face.

Our Virtual Training helps you ‘keep your space’ and stay at the top of your game.

Course Objectives

Key learning objectives of the course are:

  • Understand the regulatory requirements, standards and expectations for pharmaceutical water systems
  • Understand how to design, build, validate and manage water systems cost effectively
  • Be able to compare different strategies for generation, pre-treatment, storage and distribution of pharmaceutical grade water and select the most appropriate for your application

Course Content

  • Water Types, Specs Uses and Applications
  • Methods of Purification – Purified Water EP/USP
  • Methods of Purification – Water for Injections EP/USP
  • RO vs Distillation for WFI New EP Proposals
  • The Purification Train and Pre-Treatments
  • Storage and Distributions Systems
  • Basic Microbiology of Water Systems
  • Testing Requirements for Compendial Waters
  • Biofilm & Control Strategies
  • New Builds, the URS and Water Projects
  • Validation and Qualification including URS, DQ, IQ,OQ and PQ activities
  • Problems with Conventional Loops
  • HydroGienic®
  • Rapid Methods for Monitoring of Water Systems
  • Rouge
  • Monitoring and Qualification of Systems

Course Dates / Costs Description

Please note: Our online booking system works in £GBP.  Honeyman Training & Consultancy Limited reserves the right to amend any prices at any time.

All advertised prices are exclusive of any applicable VAT or local taxes.

Pharmaceutical Water Systems Training

Pharmaceutical Water Systems Training Course (Virtual) | Honeyman Training

Training prospectus 2024

We have produced an overview of the course information available online, available here in a handy PDF Prospectus.


Our Customers

Our team has trained and works with the world's leading Pharmaceutical companies, including …

Latest News

3rd May 2024

Virtual training Vs in-Person courses: A Comparison

Read more

23rd April 2024

Technical Briefing (PDF): Liquid and Gas Filtration

Read more

13th February 2024

Locations we cover as a Pharmaceutical Training Company

Read more

30th January 2024

Technical Briefing (PDF): Cleanroom Airflow Visualisation

Read more

15th December 2023

Technical Briefing (PDF): High Efficiency Air Filters

Read more

1st December 2023

Why Attend the Microbial Risk Management During Cleanroom Operations Course?

Read more

17th November 2023

Benefits of Biotechnology Training Course

Read more

29th September 2023

Benefits of Microbiology Course for Non-Microbiologists in Pharmaceutical Manufacturing

Read more

11th September 2023

Benefits of Pharmaceutical Sterilisation Courses

Read more
View all articles